Tag: FLOOR AND WALL JOINT TANKING

Condensation and mould

September to April is regarded as the condensation season, condensation and mould related problems are a very common problem that seem to go on and on in some properties, most of the problems I come […]

Is it really rising damp?

Sometimes a damp survey will require a destructive survey, before any form of damp proofing is recommended. When using a moisture meter for damp diagnosis ¬†you need to profile up the wall from the skirting […]

Penetrating damp problem and wall tie corrosion

Penetrating damp problems can cause severe problems to buildings, whether it’s a traditional solid red brick, stone, or even modern cavity wall construction. Penetrating damp is normally quite simple to diagnose as the problem is […]

Listed building surveys and repairs for dampness, timber decay and infestation

Traditional and listed buildings especially timber framed buildings that are suffering with rising and penetrating damp need to be surveyed by a competent surveyor. The surveyor should have a good understanding of how these buildings […]

Should a speedy meter-carbide meter be used for quantitative damp diagnosis on site?

This is written as simply as possible, more for the general public to understand, and is to try and educate them on the speedy meter, and how it can – and is used incorrectly. The […]

The damp stains on the chimney breast, is it salt damp or a leak?

Have you got a damp stain on your chimney that you can’t seem to get rid of? Is it hygroscopic salts? Is it a leak? We have seen many cases where roofs have been repaired […]